SPATIUM PRO 3M A1 CRI80 3000K-LED-High power schijnwerpers 3000K 480W

Add to selection
General information
Ordercode YESSS
3111-0609
Product code
GWP3333AB830
EAN code
08034035086380
Product group
Downlight/spot/floodlight
Brand
Gewiss
Serie
SPATIUM PRO
Type
GWP3333AB830
SPATIUM PRO 3M A1 CRI80 3000K-LED-High power schijnwerpers 3000K 480W SPATIUM PRO 3M A1 CRI80 3000K-LED-High power schijnwerpers 3000K 480W
STOCK
IN STOCK
0 piece
Product description

High-power schijnwerper voor buiten geschikt voor het verlichten van grote gebieden zoals: parkeergarages, havens, grote industriële gebieden en luchthavens. De modules zijn uit elkaar geplaatst om een ​​betere warmteafvoer mogelijk te maken en de efficiëntie en levensduur van het systeem te vergroten. De schijnwerper heeft een grafietgrijze afwerking met driewaardige behandeling voor maximale weerstand tegen oxidatie en is uitgerust met een geïntegreerd "zelfreinigend" thermisch dissipatiesysteem. De schijnwerper is verkrijgbaar in kleurtemperaturen 3000K, 4000K of 5700K en CRI≥70 (SDCM 5), CRI≥80 (SDCM 3). De serie bevat ook 4 soorten optieken: 40° rond, een symmetrische/elliptische optiek en 2 asymmetrische optieken. Het systeem omvat een externe voedingsbox die op de beugel wordt bevestigd of op afstand wordt bediend in de DALI-versie. De voeding is bedoeld voor enkelfase nul-aansluiting en is beschermd tegen piekspanningen tot 6 kV in de differentiële modus en 10 kV in de gewone modus. Het T.I.R.Ex optische systeem, ontwikkeld door GEWISS, met zeer transparante PMMA HT-lenzen, maakt totale controle over de lichtbundel mogelijk, waardoor enorme flexibiliteit op ontwerpgebied mogelijk is, met hoge kwalitatieve en kwantitatieve prestaties. Het bestaat uit drie modules, elk met een ontluchtings- en anticondensklep. Het aluminium rotatiesysteem tussen de beugel en de optische modules is afgeknot-conisch met een geïntegreerde goniometer voor eenvoudige controle van de oriëntatie en bevestiging door middel van een stelschroef, die de stabiliteit van iedere individuele module in de loop van de tijd garandeert. L90B10 (Tq 25°C) > 100.000 h; L80B10 (Tq 25°C) > 150.000 h.

Product specifications
Suitable for surface mounting
No
Suitable for built-in mounting
No
Suitable for suspended mounting
No
Suitable for ceiling mounting
Yes
Suitable for traverse mounting
No
Suitable for pedestal/floor mounting
Yes
Suitable for light-track mounting
No
Suitable for clamp-mounting
No
Suitable for low voltage cable system
No
Adjustability
Swivelling
With movement sensor
No
With light sensor
No
Lamp type
LED not exchangeable
With light source
Yes
Suitable for number of light sources
3
Lamp holder
None
Housing material
Aluminium
Surface protection
Powder coating
Housing colour
Grey
Material cover
Structured glass
Surface brushed
No
Voltage type
AC
Type of control gear
LED operating device current-controlled
With control gear
No
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
Yes
Dimming DMX
No
Dimming DSI
No
Dimming potentiometer (integrated)
No
Dimming LineSwitch
No
Dimming manufacturer's proprietary system
No
Dimming mains voltage modulation
No
Dimming phase cut-off (trailing edge)
No
Dimming phase cut-on (leading edge)
No
Dimming programmable
Yes
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming with push-button
No
Reflector
None
Light distributor
Focal lens
Light distribution
Asymmetric
Beam angle
41-80° - Wide beam
Light outlet
Direct
Impact strength
IK08
Protection class according to IEC 61140
I
Rated ambient temperature according to IEC 62722-2-1
-25 - 50 °C
Max. system power
1200 W
Colour of light
White
Colour temperature
3000 - 3000 K
Colour rendering index CRI
80-89
Power factor
0.9
Width
772 mm
Height/depth
631 mm
Length
750 mm
Type of wiring
Ending
Number of poles
8
Conductor cross section
1.5 mm²
Connectable conductor cross section
1.5 - 1.5 mm²
Connection type
Push-in clamp
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24
No
Suitable for workplace according to EN 12464-1
No
Covering of the luminaire with thermally insulating material possible
No
Colour consistency (McAdam ellipse)
SDCM5
Suitable for wall mounting
Yes
Exchangeable control gear
Yes
Dimming DALI-2
Yes
Constant light output (CLO)
No
Colour of light adjustable
No
Luminous flux adjustable
Continuously variable
Beam angle adjustable
No
Max. number of luminaires per miniature circuit breaker B16 (MCB)
1
Max. number of luminaires per miniature circuit breaker C16 (MCB)
1
IFTTT support available
No
Compatible with Apple HomeKit
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No
Nominal current
950 - 950 mA
Operation by Bluetooth
No
more specifications
^