Heating capacity at 7/35 °C according to EN 14511
4.25 kW
COP at 7/35 °C according to EN 14511
2.55
Suitable for additional heating central heating
Yes
Room temperature control
Yes
Type of regulation
Weather-dependent control
Kind of optimization
OpenTherm
External controller required
Yes
Suitable for hot tap water
Yes
Hot tap water control integrated
Yes
Suitable for active cooling
Yes
Cooling performance at 35/18 °C according to EN 14511
0.92 - 2.36 kW
Cooling performance at 35/7 °C according to EN 14511
0.77 - 1.72 kW
Suitable for swimming pool water heating
No
Swimming pool controls
No
Regulation for central heating boiler control
Yes
Regulation for buffer tank control
No
Modulating compressor
Yes
Modulation percentage
39 - 100 %
Sound performance level according to EN 12102 at 0/35 °C
54 dB
External pressure system pump available at nominal flow
0.55 bar
Air temperature
-10 - 35 °C
Air volume
710 - 1000 m³/h
Max. heating water supply temperature
60 °C
Nominal volume flow rate output system
0.21 l/s
Max. operating pressure output system
3 bar
Degree of protection (IP)
IPX4
Data transfer via internet
Yes
Data transfer via bus connection
Yes
Type of pump (system pump)
Energy saving
Type voltage pump (system pump)
DC
Speed control pump (system pump)
Built-in (integrated)
Type of speed control (system pump)
Continuously variable
Connection and control multiple output systems possible
Yes
ηwh (water heating energy efficiency)
102 %
Device emplacement
Indoor positioning
Connection voltage
216.2 - 243.8 V
Refrigerant pre-charge
0.4 kg
Global warming potential (GWP)
3
Fuse size of the device
16 A
PED (Pressure Equipment Directive) category according to 2014/68/EU
2
SCOP low temperature application (35 °C) at average conditions
3.84
ηs, h (low temperature application (35 °C) at average conditions)
151 %
Energy efficiency class space heating (35 °C) at average conditions
A++
With integrated buffer tank
No
Max. electric power input
16 A
Nominal duct diameter
250 mm
Cold tap water connection
External thread cylindrical BSPP-G (ISO 228-1)
Nominal diameter cold tap water
1 inch (25)
Hot tap water connection
External thread cylindrical BSPP-G (ISO 228-1)
Nominal diameter hot tap water
1 inch (25)
Nominal diameter output system
1 inch (25)