Ceiling-/wall luminaire Prolumia
Add to selection
General information
Ordercode YESSS
3130-0267 
Product code
40008893
EAN code
08721063003631
Product group
Ceiling-/wall luminaire
Brand
Prolumia
Product specifications
Suitable for suspended mounting
Yes
Suitable for ceiling mounting
Yes
Suitable for built-in mounting
No
Suitable for surface mounting
Yes
Suitable for light line configuration
No
Suitable for workplace according to EN 12464-1
Yes
Lamp type
LED exchangeable
With light source
Yes
Suitable for number of light sources
1
Lamp holder
Other
Housing material
Plastic
Housing colour
Black
Material cover
Plastic, opal
Voltage type
AC/DC
Nominal voltage
220 - 240 V
Type of control gear
Not required
With control gear
Yes
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming potentiometer (integrated)
No
Dimming manufacturer's proprietary system
No
Dimming mains voltage modulation
No
Dimming phase cut-off (trailing edge)
No
Dimming phase cut-on (leading edge)
No
Dimming programmable
No
Dimming RF
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming with push-button
No
Light distributor
Diffuser lens/optic/panel
Light distribution
Symmetric
Beam angle
> 80° - Extreme wide beam
Light outlet
Direct
Rated lifetime L70/B50 at 25 °C
228000 h
Degree of protection (NEMA)
3
Impact strength
IK08
Protection class according to IEC 61140
II
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24
Yes
Rated ambient temperature according to IEC 62722-2-1
0 - 50 °C
Suitable for emergency lighting
Yes
With movement sensor
No
With light sensor
No
Covering of the luminaire with thermally insulating material possible
No
With air slots
No
Filament test according to IEC 60695-2-11
650 °C - 30 s
Suitable for lamp power
4 - 11 W
Max. system power
11 W
Colour of light
White
Colour temperature
3000 - 4000 K
Colour rendering index CRI
80-89
Power factor
0.875
Width
290 mm
Height/depth
57 mm
Length
290 mm
Outer diameter
290 mm
Type of wiring
Ending
Number of poles
4
Conductor cross section
2.5 mm²
Connection type
Plug-in connector for plug-in building installation
Surface protection housing
Plastic-coated
Nominal current
65 - 130 mA
Exchangeable control gear
Yes
Dimming DALI-2
No
Colour consistency (McAdam ellipse)
SDCM3
Lumen maintenance at median useful life of 35,000 h at 25 °C ambient (tq)
94.88 %
Lumen maintenance at median useful life of 50,000 h at 25 °C ambient (tq)
92.67 %
Lumen maintenance at median useful life of 75,000 h at 25 °C ambient (tq)
89.08 %
Failure rate at median useful life of 35,000 h at 25 °C ambient (tq)
5.12 %
Failure rate at median useful life of 50,000 h at 25 °C ambient (tq)
7.33 %
Failure rate at median useful life of 75,000 h at 25 °C ambient (tq)
10.92 %
Max. number of luminaires per miniature circuit breaker B16 (MCB)
91
Max. number of luminaires per miniature circuit breaker C16 (MCB)
183
Flickering value Pst LM
0.73
Stroboscope effect value SVM
0.1
Constant light output (CLO)
No
Photobiological safety according to EN 62471
RG0
Unified Glare Ratio (UGR)
16
Colour of light adjustable
Positions
Luminous flux adjustable
Positions
Beam angle adjustable
No
Operation by Bluetooth
No
Compatible with Apple HomeKit
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No
IFTTT support available
No
Suitable for wall mounting
Yes
Energy efficiency class of the light source according to EU regulation 2019/2015
C
Compatible with Casambi
No
Dimmable
No
Luminaire efficacy
100 - 112 lm/W
Rated luminous flux according to IEC 62722-2- 1
410 - 820 lm
Luminous intensity
200 - 455 cd
With presence detector
No
Containing product according to 2019/2020/EU
Yes
Total harmonic distortion (THD)
0.24 %
Degree of protection (IP), rear side
IP40
Degree of protection (IP), front side
IP40
Max. number of luminaires per miniature circuit breaker C10 (MCB)
114
Emergency power supply system
Peripheral (individual battery)
Luminous flux in emergency mode
250 lm
Power consumption in emergency mode
2.1 W
Emergency function monitoring system
Automatic self test
Connectable conductor cross section
1 - 2.5 mm²
Ball-proof according to DIN 18032-3
No
Suitable for clamp-mounting
No
With mounting material
Yes
With switch
No
Product information